ALLTOP TURF Artificial Grass Installation Tool Grass Cutter Synthetic Turf Knife/Cutter Artificial Turf Knife Synthetic Grass Knife Tool

Product Information

The new washing line base/spike will need to be set into concrete to secure it in place, and a spirit level will be useful to ensure the washing line will sit level. It may seem that cutting straight lines is the easiest and the best way to cut your artificial turf. However, the chances of creating visible seams and a mohawk effect can be high. The key to installing artificial turf around obstacles is carefully cutting turf away piece by piece. Don’t make one large cut at once. A mistake could cost you a lot of of turf or cause a pronounced seam. Cut pieces away carefully until you achieve the desired effect. Cut with roll upside down: When cutting artificial grass, always make your cuts with the roll upside down. This allows you to follow the lines you’ve already marked; it also aids in following the stitch rows and the natural grain of the fabric as evenly as possible.

Artificial grass needs to be laid on a firm, smooth hard surface or you won’t get a nice end finish. If you already have existing, real natural lawn grass then this needs to be removed first. It’s not recommended that you install artificial lawn on topsoil, so if you have existing soil on your planned surface area, remove it first.Treated timber, plastic lumber, treated sleepers, concrete edging or a metal edging system will all do the required job.

Measuring your lawn accurately is the first step before cutting artificial grass. To get the best results, plan the placement of each piece of artificial grass after measurement, reducing unnecessary cutting and avoiding excessive seams as much as possible. It’s easy to cut artificial turf the wrong way. It’s much harder and more expensive to fix the resulting problems.To help you avoid some of the pitfalls we regularly see from customers attempting to install their own fake lawns, we have compiled a list of the most common installation mistakes and, more importantly, how to solve them. You’ll find that after running a plate compactor over the laying course it will leave minor indentations in the aggregate. Rather than using a stiff broom, a mechanical power brush will save the professional lots of time and money, whilst also providing a top-class finish. DIYers may also find our previous article, ‘ 22 Essential Tools for Installing Artificial Grass’, helpful, as you’ll learn about the tools you’ll need to carry out your installation.

Using the right tools and cutting the turf carefully can prevent the mohawk effect. With the s-seam method, the two parts overlap and significantly reduce the visibility of the seams. If your installation requires multiple pieces of artificial grass to be joined, creating clean seams is vital for a seamless appearance. To keep your artificial grass looking pristine and healthy, regular maintenance is required. Here are some tips to help you maintain your artificial grass: But after leaving the grass unrolled for 24 hours these ridges or bumps will naturally fall out, making it far easier to lay the grass without any undulations.

8. Finishing touches

Using inadequate or unsuitable tools can lead to subpar results. Ensure you have the right tools for the job, such as a sharp utility knife or a specialized artificial grass cutter, to achieve the desired outcome. Neglecting Safety Measures: Cutting artificial grass requires some specific tools and techniques to ensure a clean and precise cut. Here are some steps to follow: Bonus tip: if you get adhesive on the plastic fibres, use a small amount of white spirit to remove it, before it sets.

Rotary washing lines can easily be placed within an artificial lawn – the base/spike will just need to be cut around to ensure easy access. We recommend removing a minimum of 75mm (3 inches) below the finished height of your lawn, which includes removing all existing grass and weeds. Brushing artificial grass serves multiple purposes. It helps to keep the blades upright, maintain a natural appearance, and evenly distribute infill materials if used. Regular brushing also helps prevent matting and ensures that the turf retains its aesthetic appeal and functionality over time. Conclusion: We’ve also included 4 additional tools and machinery that for a one-off DIY installation are unnecessary, but which the professional installer will be sure to find make their life much easier, whilst also increasing productivity and saving them money in the long run.By cutting a straight line, you are ensuring the solid appearance of your artificial turf and making it easier to join turf elements, especially when you need to work around obstacles with 90-degree angles. Measure your design to avoid waste and make the grass surface look as natural as possible. If you have many elements, such as corners, stones, and edges, measure them at least twice before making the first cut.