Maglite ST3D016 3D Cell Torch - Black

Product Information

In August, Maglite announced several new models including an LED version of the Solitaire, a Mini Maglite LED 2 AAA and a new version of the 2D LED termed the 2D LED Pro promising a beam in excess of 200 Lumens.

It is interesting to note, that although we tested in a somewhat rural area, there were neighbors within reach of the ML300L's powerful beam of light. While directing the light at various objects, we realized we had to take care to avoid shining it on houses and windows—lest someone think we were up to no good.The torch will always come preset in function set #1 (general). To change to a different function set simply unscrew the tail cap until the torch no longer turns on, pause for two seconds and then hold down the switch. While still holding down the switch, tighten the tail cap until fully tight and the torch will start to blink after four seconds, the number of blinks indicates the function set. To select the desired set, wait until the torch has done the required amount of blinks (e.g. four blinks for function set #4 Tactical), and then release the switch. All of the LED Maglites are regulated, which means that as the batteries are depleted and voltage drops, more current is drawn from the batteries to offset the lower voltage, resulting in consistent brightness until the batteries are completely depleted. The Takeaway: Maglite’s latest gives you the right amount of light for almost any situation, is manufactured in America, and offers legendary durability. Most of us probably have a Maglite of some sort sitting around the house. Known for their superior build quality and durability, Maglite is considered to be the everyday premium flashlight. We will be taking a look at Maglite’s LED line of flashlights featuring the latest Luxeon Rebel LED. The Maglite pictured on the right is mine. I did some hand filing on it to make it look more appealing. I also replaced both the tailcap and bezel, using those from a silver Maglite I still had around; to provide an appealing contrast.

LED lights have become more and more popular for many reasons, and Mag Instruments couldn’t stay behind.In my honest opinion, I would only upgrade a Maglite to Drop-in PR bulb LED for one of the following reasons: Spot to focus beam is achievable with a quarter turn of the head. Versatile and reliable, Maglite will get the job done. Maglite 2D pro 274 Lumens with a Cree XP-G rather than a Cree XP-E, increasing brightness while decreasing beam distance efficiency.

For those with incandescent Maglites, Maglite offers a 3W drop-in LED upgrade for the 2-cell, 3-cell, and 4-cell C or D lights, which uses the Luxeon III LED. This upgrade is being discontinued due to the older LED used, but there are aftermarket upgrades (including some with the Luxeon Rebel LED) available from manufacturers such as TerraLUX. For Mini Maglites, there are no OEM upgrades, but TerraLUX and Nite-Ize make 1W LED upgrades that will certainly improve the light’s usefulness. The V4 was released with a newly developed electronic switch enabling a Multi Mode operation and a slightly more powerful bulb producing an output of 245 Lumens.D and C battery models are put on the market; targeted to the public safety and industrial sectors (the 5C, 6C, 7C and 7D models are out of production) For the 2AA model, brightness will decrease beyond a half-turn due to increased distance between the LED and the reflector, but the head can be unscrewed all the way and the light converted into “candle mode” Maglite XL50: This is a simpler version of the XL100, featuring three modes that can be activated with consecutive presses of the tailcap switch. The XL50 will have a lower retail price than the XL100. D-cell lights with the Luxeon III will have a spare incandescent bulb in the tail cap. For the Luxeon Rebel models, the tail cap is not very interesting and consists of only a spring. If you’re an incandescent Maglite user, you will certainly be surprised with the output of the LED Maglite. LEDs give off a cool white color, do not generate as much heat, and are brighter. As with incandescent Maglites, the larger models can be used as a baton if needed, although using the head as the striking surface would not be best as the LED cannot be replaced like a bulb! Below are some beamshots of the lights in spot focus:

Runtime with medium power mode is approximately 12 hours with 4D cells. Power consumption of approximately 3 watts producing approximately 350 lumens On March 30, 2007, the Los Angeles Police Department announced that they would be switching to a smaller, lighter LED flashlight that cannot be used as a baton, in response to a highly publicized incident where an officer was accused of using excessive force against a suspect by using a Maglite. [6] Gallery [ edit ] While the 2AA includes two alkaline batteries and the instructions specify that only alkaline batteries should be used, it is not recommended to use alkaline batteries. The reasoning behind this is that no matter the brand, alkaline batteries can and will leak! If the light is stored in extreme conditions, such as in the glove box of a car, the chances of leakage are much higher. Instead, lithium primaries or low self-discharge (LSD) NiMH rechargeable batteries are better alternatives. It is designed with a solid polished metal reflector and heat sinking to allow for improved optics and heat dissapation. This bulb will transform your Maglite into a ultra high performance, reliable, energy efficient torch making it the perfect choice for professionals.Runtime with low power mode is approximately 36 hours.with 4D cells. Power consumption approximately 1 watt producing approximately 100 lumens A variety of LED and rechargeable flashlights introduced. These include the ML100 and the rechargeable/C Cell LED ML125 Maglite Mag-Tac flashlight plain bezel, 310 Lumens, low mode at around 100 Lumens. First Maglite flashlight to use CR123A batteries. Tactical style designed with military input. The 2AA light sports a multi-mode switch with four modes: 100%, 25%, blink, and SOS. If the light is needed for an extended period of time, one set of batteries will last for more than a day on 25% mode.