Diamond cut wheels will not retain their finish for as long as a powder coated wheel. Any damage to the lacquer however small will allow water to seep in-between the lacquer and the alloy leaving “milky patches” on the diamond cut finish area. Always ask your Wheel Specialist technician if you have any concerns with your wheel. How many times can you re cut/refurbish a diamond cut wheel We wish we could give you a magic number, but there’s not one. Each kit contains a certain amount of filler, paint, and other tools and materials. If the damage on your wheels is severe, then your kit may only have enough materials to repair one or two wheels. If the damage is minor, then you may be able to use the kit on all four wheels. Start by cleaning the wheel with washing up liquid. You need to remove all dirt and grease before you go any further.

We have a nationwide network of mobile repair specialists. This means the alloy repair could be completed at your home or work. Alternatively, you can visit one of our Car Care Centres if they offer the alloy wheel repair service.**

Very satisfied with this product. It took about an hour to complete the process, and I didn’t need my husband to do this. I did it myself! Very pleased with my repaired rims!” Most of our business is with the motor trade but just this morning, we’ve had five members of the public arrive with wheels bent by deep potholes,” said Andy Leppenwell, the general manager. remove the shield). After this time the putty will have set quite hard; you can then start to file, Turn your engine off, put your hazard lights on, engage the handbrake and put the car into neutral (or 'park' if you drive an automatic). Make sure everyone is out of the car and safely away from the road, and place a warning triangle on the road behind the car if you have one. This kit comes with filler, a paint pen, and other tools needed for easy application. It’s designed for steel and alloy wheels on all makes and models. This kit provides for a permanent solution that can:

If you’re using a brush, make sure to use a small one and apply thin coats, to avoid brush marks in the finish. If you don’t have the confidence to use an alloy repair kit or want a professional, guaranteed* finish, then you don’t need to continue searching for “diamond cut alloy wheels repair near me”. You need look no further. You can always call your local ChipsAway specialist to complete an alloy wheel repair.Many cars are now sold without a spare wheel and are instead supplied with an emergency tyre repair kit. These typically consist of: Diamond cutting involves removing a thin layer of alloy from the wheel using specialist lathing equipment. Diamond cut wheels can only be refurbished a number of times as too much alloy would eventually be removed. You may wish to consider our powder coat refurbishment as a durable and long lasting refurbishment method instead. Finally, to get a finish closer to my car’s original finish, I sprayed on a coat of lacquer (also available over the counter) and once it was dry, I had a set of new-looking alloys ready for my winter tyres. Be sure to apply the paint layer by layer, allowing each layer to dry before applying the next. With spray cans, you’ll need to keep shaking the can before spraying. If you’re using a brush, make sure it’s a small one and that you use it delicately to avoid paint marks. Once complete, allow the paint to fully dry before moving onto the next step.