One wall looks shiny and after sanding with 120 grit the wall still feels very smooth and the pours of the plaster looks very closed.

Consistency apart, we tested the product on new plaster walls and achieved a decent result. However, we wouldn’t recommend using this as an undercoat on previously painted walls. According to other users, not only does the product have a poor covering power on coloured surfaces, but it also does a poor job of sealing old flaking paint. The best way to apply the primer is either with a brush or with a roller; both tools are ideal to ensure a deep penetration of the product into the wall which is essential to achieve a proper sealing of the surface. Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers.When doing the mist coat you could see stains in the plaster in places (Maybe pva mixed in plaster). In a modern home, play with tonalities of grey. Slate grey is a contemporary choice that works well in large environments. The beauty of a small room can be enhanced by dove grey or Manhattan grey.

Top tip: Watch out for drips! Mist coat paint is really runny, so make sure you roll over drips before they dry.

The plasterer who plastered the ceiling over polished the plaster closing the surface off. Affectively only allowing the water innto the and stopping the paint from soaking in to the plaster. Sand the wall to level the surface, remove the dust and clean all stains with degreaser. Rinse with clean water and let the wall dry before proceeding. Yellow is a beautiful, solar colour that adds warmth to a room. Stimulating the appetite, it is ideal for the kitchen. New plaster walls require minimal surface preparation. Usually, a light sanding and cleaning suffice. If you’re redecorating previously painted walls, inspect the state of the old paint and remove any flakes and peeling bits. Priming is necessary on new or bare plaster surfaces. A plaster sealer or primer provides an impermeable base that reduces wall porosity while improving adherence. This reduces the quantity of paint required, minimising the costs and duration of the project.

A. If you’re wondering how to paint new plaster, you’re not alone. It’s a decorating dilemma that many homeowners face when a room has been replastered or a new wall built in. It’s important to note that painting new plaster is different to painting an ordinary wall. It requires more preparation – and patience! There are extra steps you need to take, including the application of a mist coat paint, before you can add a top coat of your chosen colour. The good news, you’ll find everything you need to know below. How to paint new plaster? – 4 key steps to follow Cover all areas not to be painted with masking tape and lay drop cloths on the floor and surrounding furniture.Q. I’m painting new plaster and want to achieve a professional finish. How and when should I apply mist coat paint? What’s the best paint for new plaster? The mist coat was too neat meaning what little water there was is absorbed leaving the vinyl element of the paint on the surface of the plaster instead of actually soaking into the plaster evenly. Mix a 50/50 ratio of water and emulsion (white wash). Paint the whole ceiling making sure to coat everything and not to go too mad on this coat. You still have two more coats to go on there. Painting new plaster that’s completely dry can also leave you with uneven brush strokes. So, the next course of action is to create your own mist coat paint. Mist coat paint is simply watered-down emulsion paint, which acts as your primer. All you need to do is get some white emulsion paint and thin it out with water – it’s that easy! Ten parts paint to one part water should work.