It is seriously the best manual grout remover tool and one I simply love to use. Just remember that this grout remover needs a lot of caution mind you. If your hand slips and your run into the tile glaze you could chip the surface of the tile. You will easily tell once you have hit the bottom of the grout line and in some cases will actually see the thinset underneath. Below I have provided you with links to both tools with the best prices I have found on the internet.

The size and time frame of the project will determine whether you use manual or mechanical grout removal tools. Note that the mechanical tools mentioned here all have various uses beyond removing grout, such as cutting and sanding. For tough, glazed tiles with a rounded finish it is not so bad but for modern-day large format tiles that are cut straight at the factory, this sort of thing can lead to tiles getting chipped. Modern Lithium Ion batteries are stunning in their power and run-time but they do run out eventually. This will mean a downtime of at least 50-minutes as you wait for your battery to recharge. This will result in a lot of frustration and wasted grout. So even when regrouting, you need to remove the old grout. The Coitak Angled Grout Saw is 5.3 inches along the straight part of the handle, with an additional 3.75 inches of angled handle, so even large hands should easily be able to hold it comfortably. It has a hanging hole at the base of the handle, so you can hang it on a hook in your workshop, where it will be easy to find the next time you need it.

4. Power Grinder

Unsanded grouts crumble and flake away after one or two good runs with this tool and it even eats into sanded grouts. If you’re still wondering about these tools, take a look at these commonly asked questions about grout removal and the detailed answers below. Q: What is the easiest way to remove grout? This tool for removing grout can rip through sanded grout however it will take a very long time and require a lot of effort.

It is simply a nice comfy handle with a carbide tipped metal blade that smashes its way through the old grout. It is great for soft grouts like the kind you would often find on walls or the more modern unsanded grouts we use nowadays.Take it at small sections at a time and use a brush or vacuum cleaner to remove any debris before proceeding further. This will ensure you don’t miss a spot and remove enough material as possible. The only limitation of your multi-tool will be when you run it up against a wall. This means the superior DeWalt Grout Remover blade will fit perfectly onto your new Dewalt oscillating multi-tool and make the old tile grout removal job an absolute breeze along with any other grout removal blade. You can mix and match them as you wish and use anyone for whatever the job you will be undertaking.

Although admittedly your arms and hands are going to get a workout, the QEP Grout Removal Tool’s rubber grip, with its comfortable, ergonomic design, helps to reduce hand fatigue as much as possible. But it’s the business end of the tool that gets the job done quite effectively.Even if it’s for a one time job, you can easily justify spending the coin on the Genesis and then pawning it off to a friend or just holding onto if the need ever arises. It’s the beauty of the low cost, it empowers anyone to have a powered grout removal tool at any budget. In theory, there isn’t any reason why it shouldn’t work. Just like every other grout removal tool it has a carbide tip to strengthen and aid tile grout removal. Lastly, you would have also had a very tough time properly washing the tiles during the initial regrouting.

Whatever their thoughts on the subject may be I can truthfully say my idea of using a carbide cutter to remove grout was a rare flash of brilliance.You will need to replace the bit when it wears down. Some people have reported that these bits have a tendency to break quite easily while the tool can periodically overheat. Users also say it’s not very efficient with grout that’s less than 1/8-inch wide. 2. Hammer and Screwdriver