Limescale can build up in the machine over time, and this can affect the quality of the water used to make the formula. Descaling removes the limescale and other mineral deposits that can accumulate in the machine, ensuring that the water is clean and clear.

Replace the filter in your Perfect Prep Machine every 3 months to ensure that it continues to provide safe and hygienic water for your baby’s formula. Make sure to use only Tommee Tippee filters that are designed for use with the Perfect Prep Machine. Bottle Feeding

How to Descale Tommee Tippee Prep Machine

Small particles of carbon may be in the bag or on the surface of your filter. These dust particles are harmless and will be reduced during the initial set up process when submerging in clean fresh water. Wait whilst the boiled water is emptied from the tank, through the dispenser outlet, into the container that you placed under the outlet in step 1. This can take a few minutes.

It’s important to note that you should only use distilled white vinegar for descaling if it is specifically recommended by the manufacturer. Using other types of vinegar, such as white malt vinegar, can damage the machine and void the warranty. Using a cold-water sterilising solution (following manufacturer guidelines for using with 1.8 litres of water), add required amount to the water tank. Fill the tank to the max line with cold water and place a suitable container under the dispenser spout. Before descaling, make sure to empty the water tank and remove any remaining formula from the machine. Clean the machine before first use: Before using the machine for the first time, run a cleaning cycle to ensure that the machine is clean and free from any contaminants. Press and hold the start/stop button for 2 seconds to activate the cleaning mode. The cleaning mode light will illuminate.It is recommended that you descale the machine at least once every three months, or more frequently if you live in an area with hard water. Hard water contains higher levels of minerals, which can lead to a faster build-up of limescale in the machine. Do not place your Perfect Prep Machine near any heat sources such as stoves or ovens. Avoid exposing the machine to direct sunlight or leaving it in a hot car. This can cause damage to the machine and affect its performance. Home Set Up Pop a container under the dispenser outlet to capture the water used to clean the system (ideally at least 1 litre capacity). The empty warning light should be off. The hot light should be on.

Using a clean cloth, wipe down the water tank to remove any debris or buildup. Rinse the tank with clean water and dry it thoroughly. Step 5: Prepare the Descaling Solution Replace the water tank and turn on the machine. Wait for the water level low warning light to go out, indicating that the water tank is empty.If you notice that your Tommee Tippee Perfect Prep Machine is not working as efficiently as it should, it may be time to descale it. Descaling is an important process that helps to remove limescale buildup and other impurities from the machine, ensuring that it continues to function properly. Here’s a step-by-step guide on how to descale your Tommee Tippee Perfect Prep Machine. Clean the external machine surface with a clean cloth (it is advisable to use an antibacterial solution), taking care to clean in all grooves and under the dispenser spout. Overall, the Tommee Tippee Perfect Prep Machine is a convenient and reliable system for preparing baby formula. It takes the guesswork out of measuring water and formula powder, ensuring that your baby’s formula is always prepared correctly. The Importance of Descaling In addition to running the cleaning cycle, you should also regularly clean the water tank and dispenser to prevent the growth of bacteria. You can do this by using a soft cloth and warm, soapy water to wipe down the surfaces. Be sure to rinse thoroughly with clean water and dry completely before using the machine again. Additional Care and Maintenance Tips In conclusion, it is crucial to recognise the warning signs that indicate your Tommee Tippee Perfect Prep Machine needs descaling. Ignoring these signs can lead to a build-up of limescale, affecting the quality of the water and potentially your baby’s health. Keep an eye out for the warning light, descaling light, and any changes in the green light to ensure that your machine is working correctly. Preparing for the Descaling Process

Always ensure good hygiene by washing your hands and work surfaces before handling the water filter. Press the filter volume reset button for 2 seconds to clear the memory. Discard dispensed water. Your machine is now ready to use. By following these steps, you can ensure that your Perfect Prep Machine is clean and safe to use, giving you peace of mind and making feeding time a stress-free experience. Key Takeaways

Pharmacy product

Keeping your Tommee Tippee Perfect Prep Machine clean and descaled is important to ensure that your baby’s formula is prepared safely and hygienically. Here are some key takeaways to keep in mind when descaling your machine: At this time the lid, hopper and bottle stand should also be cleaned using hot soapy water, rinsed thoroughly, and allowed to dry naturally (do not use cloths or tea towels to dry). Our Perfect Prep™ are compatible for use in the Perfect Prep™ Original and the Perfect Prep™ Day & Night machines. Pour 1 litre of clear/white (food grade) vinegar into the water tank. Top up the water tank to the max line with freshly boiled water and place a suitable container under the dispenser spout. Listen out for the beep and the empty warning light should come on. level low warning light will illuminate once the water has flushed through the system.