The only thing that I would caution against is using the saw tooth tool to remove old silicone because if, like me, you are not in complete control of it you can scratch other surfaces very easily. I resorted to using a sharp wood chisel to remove the rest of the old silicone. As bathroom fitters, we do alot of siliconing. The standard of our installations is high and our customers expect a very high standard in our finishing....Using the fugi makes any silicone job neat and easy. It is very useful for difficult areas as the silicone can be neatly wiped away leaving a neat and tidy seal and finish. Once you use this product you will never use anything else for sealing..

The only way to get a professional finish with silicone is to use this kit, forget 'wetted' fingers, masking tape and all the other rubbish that people have told you, this kit, if used correctly, will give a finish that only professional can obtain, without the mess which is normally associated with silicone. I've always used a wet finger to finish off the profile and wasted lots of sealant and paper towel. The Cramer Profiling kit works really well, it provides a very even smooth finish and allows you to patch over areas while the sealant is wet. I wish I'd bought a set years ago. It cleans off excess sealant from tiles and floor and the tools wipe off easily with newspaper and final rub with paper towel. lt;li>The kit can be applied for up to seven average size repairs: 2 components: filling compound with hardener, spatula, sand paper for the repair of ceramic, enamel and acrylic surfaces, repair spray.</li> As an inexperienced diyer using this kit was relatively easy. You can achieve amazing results but if you've never been good with silicone sealant I recommend you watch a couple of you tube clips of a guy using this exact profiling tool. He explains everything and shows exactly what you should or shouldn't do. I found it invaluable. Finally, a tool to get behind the very tight fitting taps would have been the icing on the cake.

Cramer Kitchen & Bath Repair Kit Alpine White

Extremely competitively priced at Plumbworld. A must have for a very professional finish. Various profiles and sizes. Results were remarkable! lt;li>For long-lasting repairs of impact damage and flaking on washbasins, kitchen sinks, shower trays and bath tubs with enamel, ceramic (porcelain) and acrylic surfaces.</li> The amazing thing was Ithat after two passes of spray, I could no longer make out where the chip had been! You can just detect a slight roughness but not see the repair at all.. One of my friends is a double glazier of 20 years and even he was surprised how easy Fui's are to use and the qualtiy of the finish! For the repair of impact damage and flaking on washbasins, kitchen sinks, shower trays and bath tubs with enamel, ceramic (porcelain) and acrylic surfaces.

The itemcontains anAerosol which is prohibited by Royal Mail, most standardCouriers& Air Mail services. This product removes water Mark's and limescale in a very gentle way, and has kept my tap and sink sparkling clean. It costs more the some other products but it's worth it. lt;li>Damaged area must be clean, dry and free from grease. Remove loose pieces and rust.</li>For long-lasting repairs of impact damage and flaking on washbasins, kitchen sinks, shower trays and bath tubs with enamel, ceramic (porcelain) and acrylic surfaces. We both know exactly where it was, but struggle to find it! Excellent product which saved us a fortune if the bat had to be replaced, I can recommend this product, it worked very well for us.