Joined in 2023 
82 
63 About this deal
The user-friendly LCD screen with 3 buttons makes it easy to read and use, while the tool-free replacement of the tips is a handy feature. Also, this model is supplied with a cleaning sponge. The only missing thing is spare tips of various sizes. Does it operate at 230V/50Hz? Heater output has been increased by 30% compared to that of the conventional models HAKKO 936/937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Additionally, both the Hakko FX-888D and the Weller WE1010 have temperature control dials that allowed me to adjust the heat for different soldering tasks. This was particularly helpful for delicate projects where too much heat could potentially damage the materials being worked on. Both stations also have a digital display that showed the current temperature, as well as a convenient standby mode to conserve energy when not in use. Differences Between Hakko FX-888D and Weller WE1010 Performance All soldering irons by Hakko have the genuine tip in the set. But this tip is not particularly good for all soldering projects. However, the default FX-888D tip (T18-B) will do for the soldering standard SIP size circuits. Also, it can be used for surface mount IC’s. So, the default FX-888D tip will definitely be good for amp build. At least, for soldering through the hole parts.
This particular soldering station was highly recommended to me by a friend who has extensive experience using it. I was immediately impressed with the construction, the quality, and design of the Hakko. What particularly impressed me was the fast heating of the solder tip. My old tried and true Weller would normally require at least 10 to 15 minutes before I could use it. The Hakko came up to temperature in under one minute. The temperature is easy to adjust. The default is set at 750 degrees. Ultimately, the decision between the Hakko FX-888D and Weller WE1010 will come down to personal preference and budget. How can you tell if it’s a fake Hakko FX-888D? Overall, the WE1010 is a great soldering station for those looking for an affordable and user-friendly option. Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D.Heat up and temp stabilization are crazy fast, coming from cheap units this one surprised me when I first turned it on, was used to turning on the soldering iron and then in a few minutes could expect it to be stabilized. With the Hakko I turned it on and stood up expecting to have some time, and I wasn't 10 feet away by the time it hit temp and was almost stabilized. So very fast, which shouldn't be surprising if you have only been using the cheap units. If you are looking for the best alternative tip options for the FX-888D station beside the genuine tip, consider using bevel and chisel models. The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work. First, let’s take a look at their similarities. Both have a digital display for easier temperature control and adjustment. They both also have a slim, ergonomic design for comfortable use. The Hakko FX888D is the perfect soldering station for electronics enthusiasts or professionals. With an increased heater output of 30% compared to other models and outstanding thermal recovery, the Hakko FX888D can do soldering at a lower temperature without sacrificing quality. This means that not only will your work be just as good, but it’ll also last longer too [1]!
Temperature adjustment is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D. If you have to solder power SMD devices on multilayer boards, then I do not recommend it. You need an iron such as the ADS200 or JBC. For anything else with less power requirement, you will be well served. Read full review This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. There are only two buttons on the FX888D - UP and ENTER. Thats all that is required to set-up and operate this easy to use system. With a clear user interface, setting-up and using this soldering iron is fast and simple. This unit also comes with a convenient Soldering Iron Holder. Appliance Spare Parts - AEG, CHEF, Dishlex, Electrolux, Kelvinator, Panasonic, Sharp, Simpson & WestinghouseIf you are looking for the replacement, consider choosing the tip of the soldering iron 900M-T-H – it is compatible with the FX-888D model. Also, you may use the B1786 tip that should fit as well. However, the B1786 tip has a bit larger diameter that is why bend the tip’s end through the opening of the closure. Does this soldering iron come with the cleaning wire?
Great Deal 
New Comment