These hinges are generally fixed between 2 items that then allows the central item to pivot and move and open and close. Before making your decision to buy a hinge, it’s important to understand what the hinge is required to do. Door weight Hinges are a jointed and flexible device that is attached to any swinging part. Hinges are mechanical bearings that are used to connect two swinging objects or points to one another and give them the freedom to move relative to each other. Hinges have limited movement, allowing the joint to move only at one angle and restrict the other movements of swinging parts. To make sure you are using the correct hinges for the weight of your door, or the correct grade of external hinge for corrosion resistance as well as many other uses. Furthermore, brass hinges are more expensive than steel ones and they give a quality look to the completed product. Below are some of the more popular hinges that are available and used today. Butt Hinge

A continuous hinge is normally fitted to pieces of furniture or cabinets that require additional support. The two long leaves run the entire length of the door or window panel. Flush hinges are designed in such a way that the leaves sit flush against each other. This is achieved by fitting one leaf inside the other. This is an advantage against butt hinges since flush hinges do not need a mortise or a recess on the surface of the body they are attached to. These types of hinges are used in light load applications.Damper hinges help the slow closing of doors or lids. It controls the speed of movement. These are also used in toilet lids. Installation is fairly simple as the mounting plate is attached to the inside of the cabinet and the hinge cup is attached to the door. Once in place, the two pieces snap together. The door hinge is then adjusted so that the door is flush with the cabinet and in line with the other doors or cabinetry. These devices are used for a variety of applications, including doors, gates, window shutters, lids, etc. To suit the various requirements of these applications, hinges are available with a wide range of product specifications, such as decorative vs. functional purpose, external vs. internal placement, mounting style, full or half mortise, limited space restrictions, load capacity, etc. Based on these design characteristics, there are many different types and styles of hinges available. Barrel Hinges

This guide provides a basic understanding of hinges, including the types available and some of the material and finishing considerations. Strap hinges are usually large, robust hinges used in the construction of gates and barn doors. Any application that requires aesthetically pleasing, decorative door hinges can use a strap hinge.Hinges typically used by cabinet makers or carpenters are smaller. This is because the door on a piece of furniture, a cabinet, and cupboards do not carry a huge load. Installing an overlay hinge can be difficult as it requires that you carefully measure the exact position of the door and hinge with very little margin of error. Even a small miscalculation will result in the finished look being completely ruined.