For those using a Vanquish series detector, adding the waterproof capability is a major upgrade. Other key improvements included greater sensitivity, more detecting modes, and more advanced targeting and discrimination. That’s it, everything else is the same, the great performance, the Multi IQ technology with the simultaneous frequencies, waterproof design, and fast and accurate target ID. the instrument is totally waterproof and can be submerged to the depth of up to 10 feet, making it totally functional on the seashore.

The device comes in disassembled form, so you would have to set it up, although quite simple to do so. It does not require tools to assemble out of the box. You should fully charge the battery immediately after – it takes about four hours to charge from 0 to 100%. Adjust an array of essential and advanced detecting functions including Noise Cancel, Ground Balance, Volume Adjust, Threshold Level, Target Tone, Accept / Reject, and Recovery Speed. While the device is Bluetooth and wireless compatible with the Minelab’s ML 80 headphones, any other third-party headphones are well compatible with the metal detector. 4. Manual Ground BalanceFive Frequency Times Eight) provides five individual transmit frequencies in the one metal detector, selectable at the push of a button. Each transmit frequencyoptimisesthe detector for different size targets and conditions.EQUINOX 800 offers 5 single frequencies of 5, 10,15, 20, and 40 kHz, giving an 8times range or ratio from 5 to 40, hence the 5F×8technology designation. The selection of preset modes make this a great machine for ambitious beginners to start learning the ropes. They'll discover that the Equinox 600's settings can be customized according to the terrain they will be hunting on and how to properly work with the settings. Multi-IQ Fast recovery speed with accurate Target ID ensures you won't miss any valuable targets amongst the trash.

Each search mode had two custom search profiles which can be saved, giving six custom profiles in all Rugged and lightweight construction allows you to enjoy long detecting sessions in any environment. Only weighing 1.34kg (2.96 lbs) with 11" coil.

Overview

Press and hold the gear symbol until you see the letters “FE” appear on the screen. You are now in the Iron Bias setting. (Image Above: Middle) Note: The Iron Bias setting is only available when the operating frequency of the Equinox is set to “Multi”. When Would You Use The Iron Bias Setting?

The metal detector has four tone options: 1, 2, 5, and 50, affording you the advantage of adjusting tone and volume shift between ferrous and non-ferrous items. In the same vein, there are three levels of detection speed, and yes – adjustable. For instance, you’re likely to get more accurate results on close, valuable targets if you compromise on the depth and vice versa. In all, you could fiddle with the settings until you find the right balance for a particular terrain. The EQUINOX 600 has a generous range of volume and tone options, including Single Tone, Two Tone, Five Tone, and Fifty Tone options. The point where ferrous tones shift to non-ferrous tones may be adjusted; as can the volume of the ferrous tone. The EQUINOX 800 adds the ability to shift non-ferrous tones and volumes, which can be helpful for those who hunt strictly by ear. These options can also be an aid to those with extreme hearing loss in a particular audio range. However, all these tone and volume options do not change the basic power or depth of detection between the two models. I confess that, although all these options appeal to me, I really have not been using them because the Minelab preset options are so good it has not really been worth the bother. Three Frequency Times Three) provides three individual transmit frequencies in the one metal detector, selectable at the push of a button. Each transmit frequencyoptimisesthe detector for different size targets and conditions.EQUINOX 600 offers 3 single frequencies of 5, 10, and 15 kHz, giving a 3 times range or ratio from 5 to 15, hence the3F×3 technology designation. Visually, the Equinox 700 looks better. And we mean even better than an Equinox 600 that’s had an aftermarket carbon-fibre shaft fitted. Minelab have done well on both design and production, and the unit just looks more modern and for want of a better word, ‘cooler’. This metal detector has a user-friendly menu with easy, intuitive settings that help you enjoy effective metal hunts straight out of the box. It features 4 search modes – field, park, beach, and gold – and each of them has two sub-modes, so you get to enjoy 8 different detecting programs.The Equinox 600 provides excellent performance for the majority of hobbyists. Serious gold prospectors that need every advantage they can get when it comes to finding gold nuggets will benefit from using the Equinox 800 ( full review). Conclusion Having three selectable frequencies gives the versatility that is equivalent to three conventional single frequency detectors. You also have multiple tone options from 1, 2, 5, and 50, and you can adjust ferrous volume and the tone shift between ferrous and non-ferrous items. You can also adjust detection speed with three levels. For example, hit very deep targets with poor performance on closely adjacent targets or achieve that fine target separation on close, adjacent targets but compromise on depth. Yes, Equinox is waterproof; you can fully submerge it in water, and you don’t have to worry about possible damage. The metal detector is ideal for detecting in diverse kinds of waters – beach, rivers, lakes, streams, name it. 2. Is the Minelab Equinox 600 good for saltwater?