Designed to prevent accidental and malicious false fire alarms, SSP’s Direct range of call point covers, break glass covers and push button covers are ideal for use in schools, colleges, nursing and care homes, hospitals and shopping centres.

When you activate the manual call point, it sends a signal to the fire system’s control panel, notifying it that there is a fire in the area closest to the call point. As a minimum, this will sound the fire alarm throughout the building. It should also start the fire emergency protocols, including calling the fire brigade. Manual call points can have more than one function. They come in three colours: white, green and red. The different colours indicate the function of each individual call point:

High-use areas – to protect your calls points and fire alarms in areas that experience a high volume of traffic or use, you can use a Protective Cage. These cages will protect the call points from being accidentally activated or unintentionally damaged. SSP's range of fire alarm call point covers have been designed to significantly reduce false and malicious fire alarms set off around your building. Whether you are a school, college, university, business or any other building that is open to the public, this new low-profile fire alarm call point cover can be fitted over the top of the existing red break glass unit

Indoor and outdoor call points – Weatherproof Fire Call Point Covers are perfect for outdoor environments or damp places like swimming pools as they provide access to the call point, without allowing any moisture to corrode the call point fire alarms.Emergency Accounts should be created in advance to allow careful thought to go into the access controls and audit trails associated with them. The following factors should be considered: As compared to the traditional fire alarm systems, they only provide single signal of info i.e. no matter if it is a fire, or other uncertainties such as fault, temperature, smoke particle or barometric pressure etc, it will trigger the alarm system which is considered as false positives. This misleading information can affect different phenomena such as reporting, omission etc. Here at The Safety Centre we are fire safety specialists and believe in providing our customers with the most dependable fire alarms and products in the industry. It is this commitment to first class equipment that has made us one of the leading providers of fire alarms and other safety equipment. We believe that when it comes to alarm systems that you won't find better elsewhere, so you should be sure to browse through our competitively priced collections today. It is vital that, in the event of an emergency, all fire call points can be easily reached – no one should have to travel over 45m to reach an alarm call point, and in environments where a fire could spread rapidly, the maximum distance is shortened to 20m.

Indoor call points – Mini Call Point Covers are a great choice as they are small, easy to install, and can securely fit onto call points without restricting usage. Whether the message is a fire safety one or a general safety message, the problems facing sign makers are the same: what is the best way of conveying essential safety instructions - through pictures or words? Kept behind glass in a cabinet, where access to the accounts requires literally breaking the glass (similar to a fire extinguisher or alarm), providing an obvious indication that the accounts have been accessed and a deterrent to casual use; The multi sensor detector (also known as multi-criteria alarm) is a sensitive device which combines the input signal from both heat and optical sensors and used for wide range of fires with lower rate of unwanted false alarms. If an EN 54 certificate is over one year old, it has expired and it is not a valid certificate. Manufacturers can not sell or install the device with expired certification in any country of the European Union. [10] [11] See also [ edit ]Fire alarm testing should be carried out weekly, preferably on the same day and at the same time to remain consistent. The British Standard to do with the testing of a fire alarm system is BS 5839-6: 2019 “Fire detection and fire alarm systems for buildings”. In section 25.2 it states that all fire alarm systems in commercial premises need to be tested weekly. It’s crucial in the fire detection strategy of any building that you need to make sure your system is working efficiently and correctly. If an emergency occurs and your fire alarm system isn’t working, the results could be fatal, there’ll be no early detection of fires or sounders for safe evacuations which could lead to injuries, death and plenty of damage. How to Test My Call Points Using Keys

Many modern fire alarm pull stations are single-action and only require the user to pull down a handle to sound the alarm. Other fire alarm pull stations are dual-action, and as such require the user to perform a second task before pulling down, such as lifting or pushing in a panel on the station or breaking a glass panel with an attached hammer. Perhaps the most recognizable pull station is the "T-bar"-style pull station, so named because the handle is shaped like the letter "T". This style is manufactured by many companies, most notably SimplexGrinnell. White manual call points: Since those don’t indicate a single function, there should be additional signage telling you what this particular call point does. However, there’s one thing white manual call points can’t be used for and that’s to call the fire services Here we look at five paper-based visitor systems and ask which ones are compliant with the new GDPR legislation As we are passionate about only providing our customers with the finest fiew alarms on the market, you can trust that you will be purchasing the best and most reliable systems. Due to the efficiency and dependability of our outstanding equipment, it has been incorporated in a range of high profile locations - so you can rest assured that our alarms won't let you down.CEN - European Committee for Standardization:: Standards". Archived from the original on 2013-05-20 . Retrieved 2012-12-28. This cover has a built in photoluminescent strip that glows in the dark. This ensures that, should the lights fail in the event of a fire or emergency, there will be no delay in reaching the button.