Make m!ka Copy Stand your versatile script holder by attaching it to a m!ka Monitor Arm. Its Perspex® stand is available in landscape (A3) or portrait (A4) format. Thanks to the intelligent magnetic fixture system, a second Perspex® panel can be fixed on top of the other. Between both panels there's room to temporarily or permanently fix notes. Lastly, there is a hidden cable channel to help with the look to make sure you have less wires showing around the mic. As sturdy as they come For the Shure SM7B and MV7, we recommend using the Rode PSA1. It can support between 700 and 1.1kg of weight, which is right in the range of both the Shure SM7Band Shure MV7 microphones. Once the arm is properly installed and tensioned (some mics are heavier than others of course) it’s a dream to use. I found that my microphone (I tested this with the Elgato Wave:1 and the HyperX Quadcast S) stayed exactly where I put them, and I think that a mic arm that comes from underneath your monitors looks a lot cleaner than an arm that towers over your desk like an excavator arm, though that’s of course just my subjective opinion.

The arm is great for extra cables, is incredible, It is great for full rotation and has a professional design. And, it is highly functional, It is built with incredible build quality and has a heavy - duty design. Finally, the bietrun low profilemic arm is highly recommend, moves freely, it is dynamic and has an aesthetically pleasing design. The arm is best for high quality finish, it is dynamic and has a nice design. Finally, the ixtech low - profile mic arm is stylish, has take a chance, it is designed to be worth every penny and has excellent design. Unlike some of the other products on the list, Heil’s model employs out-of-sight internal springs. That means you don’t have to worry about springs on the outside of the case. That means no cable connectors to slow down your setup.Sometimes called a ‘scissor arm stand’, desk-mountable suspension boom arms have notably risen in popularity, thanks to the rise of streaming and podcasting. To change you m!ka Mic Arm's on air signaling color from red to white simply reverse the polarity of the drive voltage. Functionality and performance are a must, but who says you should ignore aesthetics? To improve the overall presentation of your studio, take a gander at the fully articulated Heil PL-2T Boom Arm.

Made from strong steel, the Samson MBA38-38 is incredibly durable. More importantly, that sturdiness allows it to withstand 4 pounds of equipment. If you opt for the 48-inch model, that increases to 5 pounds, making it one of the best boom arms for heavy microphones.However, with its smaller size factor, the Yellowtec m!ka does not extend as far as some of the other arms on this list. The reach sits at around 21 inches, with a maximum weight load of 1.98 pounds. That’s not insignificant, but it could limit you depending on the size of your desk/setup. The two most important aspects to look for in a boom arm are 1) compatibility and 2) maximum capacity. The RODE PSA1 has a 33-inch reach for your convenience, offering ample range. However, the real star of the show is the dual-axis swivel mount, which allows you to freely position the arm in whatever position you so desire.