Unlocked ZTE MF286D CAT 12 600mbps 4G+/LTE Home/Office Router (White). 2 x RJ11 Tel Ports. 2 x External Antennas. Works with any Mobile Network Sim Worldwide. 2.4/5GHz Wi-Fi + Bridge Mode (Renewed)

Product Information

cat: can't open '/sys/class/net/wifi1/hwcaps': No such file or d[ 49.089553] SPECTRAL : get_capability not registered monitor:add@/devices/soc.1/a800000.wifi/net/wifi1 49.256899] ol_ath_thermal_param_init: dev_name: wifi1 Although you can’t predict exactly what speeds you’ll get with the 4G Hub, Three has a good return policy, allowing you to test the device before committing to a 24 month contract. Now you should be at a uboot menu and this is where we need to be and where the things I did differ slightly to the very helpful guide on the link a few lines above. monitor:add@/devices/soc.1/a000000.wifi/net/wifi0[ 46.564831] ol_ath_thermal_param_init: dev_name: wifi0

Using the 4G Hub plugged into a computer using the provided Ethernet cable, the best speed test result we were able to get was: very interesting... I just factory reset the router. after the reboot the default language is not english anymore. It looks like it has the Elisa firmware flashed?

The huawei E3372 I have also runs android behind the scenes, so from my sample size of 2 it seems to be common. I guess when pretty much the whole market for modems is phones, android is a good choice for the SoCs OS. When trying to add a software update for MTS Russia, we will receive an error because we are trying to upload incompatible software. home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/zte_genl_kernel-1.0/zte_genl_kernel_main.c[173]: INFO:send msg to user ok, cmd=1, msg=0000

Have you experimented with other firmware? Was reading about it over here and recognised the name .while this is for the MF286C (probably the US version), I suspect that the antenna design is similar if not identical on the MF286D. I have an XPOL-2-5G antenna and I just connected it to pins 3 and 4 of the modem, that seems to get me the best signal strength although I have no idea if those are the right ones. Yes, 1x 1.1, 1x 1.1 Device, 1x 2.0, 1x 2.0 Device, 2x 2.0, 3x 2.0, 4x 2.0, 5x 2.0, 6x 2.0, more than 6x 2.0, 1x 3.0, 2x 3.0, 3x 3.0, 4x 3.0, 5x 3.0, 6x 3.0, more than 6x 3.0, Mod, 1x Device, 1x Header, 1x OTG, 1x µUSB (charging), 1x Power only Solder on your GPIO pins, 4 of them are needed and they are up near the top of the board in a line all with holes filled with solder. From the top they are 3.3v, RX, TX and Ground (RX, TX maybe be the other way round but at this stage it doesnt matter).

Like if there are 5 phones connected to it and then i want to limit only phone 1, 2 and 3 at 1 Mbps… but let the phone 4 and 5 have maximum Mbps? Reply Install image via “sysupgrade -n” (like “sysupgrade -n /tmp/openwrt-ipq40xx-generic-zte_mf286d-squashfs-sysupgrade.bin”; previously wgeting bin). Sometimes it could print ubi attach error, but please ignore it if process goes forward. Depends how wide each B3 carrier is. My local mast over 8 or so years went from 10, 15, 20, 20+10, 20+15, 20+20 MHz as it is now, and in the summer gained B7. Quote from: meritez on June 01, 2022, 12:06:39 AM There's a script that lets you get into the debug mode of the web interface and select bands. Langattoman verkon nimen (SSID/ SSID-5G) ja salasanan (WiFi/WLAN-Key) löydät reitittimen pohjassa olevasta tarrasta. Tarvitset näitä tietokoneen tai muun langattoman laitteen ja mobiilireitittimen välisen yhteyden muodostamiseen.monitor:add@/devices/soc.1/a000000.wifi/net/wifi0/queues/rx-0[ 46.606402] *********** IPQ4019 ************* Kirjaudu sivulle käyttämällä salasanaasi. Salasana on reitittimen langattoman verkon (WLAN/ WiFi) salasana. Tämän jälkeen näytölle ilmestyy ilmoitus joka kertoo uuden version olevan saatavilla. Ilmoitus tulee hyväksyä klikkaamalla OK. An unusual feature is a removable battery with a capacity of 3000 mAh. It is a bit similar to the equipment for mobile 4G routers because you can take it anywhere and use it for at least 3 hours. It is a pity that instead of the USB charger, it has a 12-volt AC power adapter – you cannot power it with a power bank.

Mobiilireitittimen asetukset ovat oletuksena oikein, eikä niitä tarvitse erikseen muokata. Halutessasi voit muokata ja hallita laitteen hallintaliittymän kautta. Heikkoon 3G/4G-kuuluvuuteen voit kokeilla esimerkiksi lisäantennia. MF286-reitittimessä on kaksi antennipaikkaa (SMA). Compared with the old 4G Hub router (Huawei B535-232), the main upgrade on the ZTE MF286D is the superior support for new 4G networking technology. Whereas the old 4G Hub router supported 2×2 MIMO and 64QAM, the new 4G Hub router supports 4×4 MIMO and 256QAM. In combination with the support for Three’s L-band spectrum (band 32), it should deliver much better home broadband performance. Three 4G Hub Speeds wlan_vap_create : exit. devhandle=0xc97c04c0, vap=0xca038000, opmode=IEEE80211_M_HOSTAP, flags=0x1.In July 2021, Three launched their new 4G Hub router in the UK. Also known as the ZTE MF286D, it’s a major upgrade on the old 4G Hub router (the Huawei B535) that was previously offered to 4G home broadband customers. unknown 2020, unknown 2019, unknown 2018, Available 2020, Available 2019, Available 2018, Available 2017, Discontinued 2020, Discontinued 2019, Discontinued 2018, Discontinued 2017, Discontinued 2016, Discontinued 2015, Discontinued 2014, Discontinued 2013, Discontinued 2012, Discontinued 2011, Discontinued 2010, Discontinued The Three 4G Hub has two antenna ports, which you can plug in external antennas, if you choose to do so. ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.