This is the Aico Ei3000MRF SmartLINK Module which allows for wireless interconnection and data extraction. You can simply plug in to any Aico 3000 Series alarms. The Ei3000MRF SmartLINK module can be fitted to any mains powered Alarm from the Ei3000 Series to enable them to be interconnected wirelessly to other devices.

Ei3000MRF SmartLINK Module for Wireless Interconnection

The Ei3030 Fire & Carbon Monoxide Multi- Sensor Alarm is the latest edition to the technologically advanced 3000 Series. Add this module to any Ei3000 series alarm to enable SmartLINK interconnection and device data extraction

This is an optional add-on SmartLINK module for the Aico 3000 series of alarms to enable wireless interconnection with up to 12 SmartLINK and RadioLINK+ alarms and devices. It also facilitates a hybrid communication of hardwired and wireless connections. Proven Thermistor Heat Sensor, Optical Sensor and Electrochemical CO Sensor to provide the ultimate response, working independently and together. Built-in intelligent dust compensation technology eliminating the risk of nuisance alarms from contamination. RF Visual Indicator: Blue light flashes continuously for 0.5 to 3.5 seconds while transmitting RF signal The Ei3000MRF is an optional add-on SmartLINK module for the Ei3000 series Alarms. It enables the Alarm to communicate wirelessly with other Ei Electronics RF devices. Up to 12 devices can be interconnected. It also facilitates a hybrid communication of hardwired and wireless connections.

Aico Ei3000MRF SmartLINK Module - For 3000 Series Alarms

The new, simpler A-G energy rating scale is stricter and designed so that very few products are initially expected to achieve the top “A” rating. The Ei3000MRF module is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication. The Ei3018 Carbon Monoxide Alarm has a high performance, proven electrochemical sensor to monitor Carbon Monoxide (CO) levels in the household. The sensor is individually calibrated and tested in Carbon Monoxide gas to ensure it is completely accurate in its detection. The alarm contains our tried and tested thermistor heat sensor and our proven electrochemical CO sensor, providing protection from both Fire and CO.Functions: when the Ei3000MRF is plugged in, you get wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway (Ei1000G) and Portal. The Ei3000MRF is an optional add-on for use with the Ei3000 series of alarms. It enables wireless interconnection with up to 12 other SmartLINK / RadioLINK compatible devices and supports hybrid communication allowing for devices to be hardwired or wirelessly interlinked. The new SmartLINK technology provides the same proven wireless interconnection technology as RadioLINK and RadioLINK+. It uses Radio Frequency signals and is completely compatible with both existing systems.

Ei3018 Carbon Monoxide Alarm | Aico Ei3018 Carbon Monoxide Alarm | Aico

This Aico Ei3000MRF is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication. House Coding: this feature confines the RF communication to designated RF devices only, thus avoiding an inadvertent activation of the neighbouring alarm RF systems. SmartLINK enables real-time configurable notifications of alarm activations and events via a Gateway and Portal system for full visibility of your connected SmartLINK systems.

Ei1000G SmartLINK Gateway

To add SmartLINK technology to your system, simply plug SmartLINK modules into any 3000 Series alarm head. The Ei3000MRF Module allows for wireless interconnection and data extraction. Simply plug in to any 3000 Series alarm. The Ei129 Switched Input Module will trigger interconnected alarms if an external device is activated, such as a sprinkler system. No external parts are left exposed as the small antenna is fully enclosed within the alarm unit once fitted. Once the alarm is powered up, the RF LED on the side of the alarm device will flash red, blue and green which indicates that the module is correctly fitted and operating.

Ei3000MRF 3000 Series White Wireless SmartLINK Module Aico Ei3000MRF 3000 Series White Wireless SmartLINK Module

This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user Features remote alarm learn entry, allows installer to reactivate the entire RF system house code from one device With the introduction of the 3000 Series we have also advanced our award-winning Radio Frequency (RF) Wireless Interconnection and Data Monitoring technology. Approvals: RF performance to EN 300 220-1 in accordance with EN 300 220-2, EMC performance to EN 301 489-1 in accordance with EN 301 489-3The Remote Alarm Learn entry feature enables the installer to re-instate the full RF system house code from a single device. Additional devices can then be added to the system and coded accordingly. The Ei3000MRF is a short range device which uses a transceiver to receive, transmit and repeat the RadioLINK RF communication protocol. This ensures a robust "mesh" of RF signals and reliable paths of communication. The integrated house coding feature restricts the RF communication to designated RF devices only which reduces interference / activation with other nearby RF systems. This is the Aico Ei3028 is a dual sensor alarm - Heat and Carbon Monoxide (CO) alarm. It contains a .. Remote Alarm Learn: this feature allows the installer to re-activate the entire RF system House Coding from just one device; additional devices can be added and house-coded accordingly. Expand your home’s fire alarm network with one clean smart home system. The Ei3000MRF SmartLINK Module enables you to set up a wireless alarm interconnection for up to 12 alarms in your home. Simply plug into any 3000 Series alarm.