Interconnection cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug connector and one non-rewirable connector, intended for the interconnection between two electrical appliances". Earthed, 16A, polarized. This coupler is used for supplying power in IT applications where higher currents are required, for instance on high-power workstations and servers, power to uninterruptible power supplies, power to some power distribution units, large network routers, switches, blade enclosures, and similar equipment. This connector can also be found on high-current medical equipment. It is rectangular and has pins parallel to the long axis of the coupler face. When buying partner items like this one, your contract of sale will be with our Range Plus Partner instead of The Range. For use in very-high-temperature settings, such as some stage lighting instruments. Similar to C15/C16, but the top is narrowed to exclude the C15 cord connector.

IEC - SC 23G Dashboard > Projects / Publications: Work programme, Publications, Stability Dates, Project files". www.iec.ch . Retrieved 2023-05-12. The C19 power cable is used in higher current applications such as power PDUs in data centres, it is an industrial type connector, larger than the C13 and C15. Schuko Euro Power CablesThere are many different types of power cables used with TVs and Computers, in this brief guide we show some of the more common power leads. C13 Power Cables (Kettle Leads) IEC 60320-2-2: Interconnection couplers for household and similar equipment. This section was withdrawn in January 2016. The general requirements for these items were incorporated into IEC 60320-1 and the standard sheets were moved to IEC 60320-3.

A cable consisting of a C13 and an E interconnection connector is commonly mislabeled as an "extension cord", as although that is not the intended purpose, it can be used as such. They are also commonly mislabeled as C14 instead of E. Similar connector to C5/C6, but with a key ridge instead of an earthing conductor, withdrawn from standard. The mains appliance couplers are all engineered to connect an appliance via a power cord to mains power. I must say that I'm impressed!!! The last time I was in the local music store, there was a never ending stream of moans from customers about the inability of the store to supply leads!, and the time people had to wait to get any kind of service. I'll be putting "the word" around. George Cochrane For use in high-temperature settings (for example, electric kettle). Also used in some network appliances that provide PoE.The first edition of IEC 320 was published in 1970 [2] and was renumbered to 60320 in 1994. [3] Terminology [ edit ] IEC 60320-3: Standard sheets and gauges. [4] First published October 31, 2014, this part initially included the standard sheets for both appliance couplers and interconnection couplers. In a 2018 amendment, the standard sheets for the IP couplers defined by 60320-2-3 were added. [9] For appliance couplers the various coupler outlines are designated using a combination of letters and numbers, e.g., "C14". The connector supplies power to the appliance inlet. The appliance inlet is designated by the even number one greater than the number assigned to the connector, so a C1 connector mates with a C2 inlet, and a C15A mates with a C16A. Interconnection couplers have single letter designators, e.g., "F". They consist of a plug connector and an appliance outlet. The plug connector is the part integral with, or intended to be attached to, the cord, and the appliance outlet is the part integrated with or incorporated into the appliance or equipment or intended to be fixed to it, and from which the supply is obtained. Connector: "part of the appliance coupler integral with, or intended to be attached to, one cord connected to the supply". Hi, yesterday I did not know what a NEMA5-15RX or a IP44-110/16p were but with the excellent help of Olly and Lou of Leads Direct I now own these items. Fantastic help and service. Power cords are defined as any power cable which has had a connector installed prior to sale. There are versions that may have one connector and an unterminated end. Some assemblies may have a connector a plug. And some assemblies will even have 2 connectors (IEC lead extension). Depending on the application, there are various types to suit the needs. What are these cable assemblies used for?

The C1 coupler and C2 inlet were commonly used for mains-powered electric shavers. These have largely been supplanted by cordless shavers with rechargeable batteries or corded shavers with an AC adapter. One arbitrarily chosen example of a 1500W PSU with a C14 input is the Enermax MAXREVO 1500 W 80+ Gold. It manages to fit within the 15A input current limit because of its 80 Plus gold efficiency.Standard sheet C25 shows retaining device dimensions. Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate. Sheet 27 shows details for screw terminals, where the wire is held by wrapping it around the head of a screw. In addition the standards define further general criteria such as withdrawal forces, testing procedures, the minimum number of insertion cycles, and the number of flexings of cords.

International Standardized Appliance Connectors (IEC-60320) Reference Chart Includes diagrams of all couplers, their rated current, equipment class, and temperature rating. Appliances can be used in another country easily, with a simple change of the power supply cord (including a connector and a country-specific plug). The power supply cord can be replaced easily if damaged, because it is a standardized part that can be unplugged and re-inserted. Safety hazards, maintenance expenditure and repairs are minimized. These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F). Australian/New Zealand Standard AS/NZS 60320.1:2004, Appliance couplers for household and similar general purposes Part 1: General Requirements (IEC 60320-1, Ed. 2.0 (2001) MOD). This is the Australian version of the IEC standard with national variations shown.

C13 Power Cables (Kettle Leads)

On a standard power cord, the power is drawn from the mains and the electricity will run through the wire and arrive at its destination. This can be either into a power supply or directly into the appliance/machine itself. Due to the range of voltages available, different types of cable assemblies will suit varying requirements. What type of cable material is available? IEC 60320-2-3: Couplers with a degree of protection higher than IPX0 [7] specifies couplers with some degree of liquid ingress protection (IP). In its second edition published in 2018, the standard sheets were moved to IEC 60320-3.