12V DC Thermostat Controller All-Purpose Digital Temperature Controller Thermostat with Sensor Digital Display Microcomputer

Product Information

Example: Let’s say we want to connect a 200W device to a 12V battery. That means we have to use a 12V wire size that can handle at least 16.67 amps (200W/12V = 16.67A). Accounting for the 80% NEC rule (we will explain this later on), you need a wire with at least 13.34A ampacity. In this case, we will need a 18 AWG wire size because it has a 14A ampacity. On top of the calculated amps, we have to apply the 80% National Electric Code (NEC) rule. This states that the calculated amps should represent at most 80% of the ampacity of the wire we use. This is a safety measure; choosing a bigger wire will prevent the 12V circuit from catching on fire. To account for this rule, we simply multiply the calculated amps by a 1.25 factor like this: Using your cell phone, you can open an App and see the current settings of your thermostat. You can also change the Mode, Temperature Set Point, and Alerts. This level of control makes it as convenient as using top-notch RV entertainment systems, providing comfort and entertainment wherever you are. Wire Size Chart. This wire chart tells you what 12V wire size to choose if the device you want to run with the 12V voltage is some distance away (from 15 feet to 90 feet). It is also fully Programmable, similar to a Home thermostat where it can go On and Off at certain times of the day.

Kemo M169A Adjustable Electronic Temperature Switch

Underfloor heating systems offer a more sustainable, energy-efficient way to heat your home. To enhance the efficiency of your floor heater, a system-dedicated heating controller is recommended for a truly personalised heating solution whilst helping you avoid energy wastage. Simple installation is key with Neo. The neoStat 12v v2 has been designed to replace an existing three wire thermostat, and after joining the zone to the neoHub, remote control is possible. That means we need a wire size with an ampacity of 15.63A or higher. To choose the correct AWG wire size for a 12-volt circuit, consult the complete AWG wire size chart here.

Bimetallic Thermostat Switches

We have to be quite careful when sizing 12V wires. If we choose a wire with too low an ampacity, the circuit can go up in flames (as well as the battery). The neoStat can be configured to work as a thermostat or as a timer- so if you want to take control of your towel rails, or lighting – Neo offers you this and more!

12V DC Thermostat Controller All-Purpose Digital Temperature

In addition, you can also turn the system off completely, if you are away for weeks, but set the system to turn the AC on if the Humidity or Temperature gets too high. Call this “range action”. Voltage and Power Loss circuit is a low-voltage electric circuit. It’s primarily used in most batteries. To produce larger amounts of electric power (wattage), we usually need quite a lot of amps. That means we need relatively big 12V cable sizes.Our Smart thermostats can learn your habits, making sure your home is always at the right temperature, at the right time, for you. These controllers utilise Smartphone-based technology such as the MyHeating app which provides remote access to your heating system, automatic heat functionality and can help save you money on your heating bills too.