You can choose to either sand the top off completely or strip it and then you won’t have to sand nearly as much. This is going to take a little bit of work because the wood is very dry, so I have to really push the brush and the bristles in to all the grain, all the three-dimensional parts. Liming wax is, according to Bob Villa, a mix of liming paste and a wax made of either carnauba, beeswax, petroleum or shellac.

What is Liming Wax and How To Use It - Real Milk Paint

For best results, apply liming wax on bare wood, particularly open-grained timber, where the white pigment can settle into the grooves. I’ve created a 30-day Thought Life Challenge, one exercise a day — first working to identify negativity and weed it out, and secondly to find joy through gratitude. In this project, we lime a pair of timber doors, but the technique can be used on any suitable woodsurface. Real Milk Paint is a kid safe paint and we back that up by having our milk paint tested to be compliant and meet the requirements set by the CPSC (US Consumer Product Safety Commission).

If you’ve got a piece of wood which is oak, but it’s got a varnish on it, you will be able to achieve this look but it won’t be nearly so strong. When you are done applying the liming wax all over the wood, use another clean cloth to get rid of the excess wax on the surface. Barbara, I think for anything in the bathroom I would do a white wash or a white glaze instead of a liming wax. Even if you like the finish underneath, you will be accentuating the pores with a wire brush, so that alone will ruin any current finish. Let the coat become tacky (slightly sticky but starting to set, which can take at least 10 minutes depending on the wax), then gently buff the waxed section with large, sweeping motions of a dry cloth or rag;this will remove the excess wax whilesome white pigment remains in the grain.

to strip furniture and apply liming wax – House Mix How to strip furniture and apply liming wax – House Mix

Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

It is different from using liming wax because the table can be sealed with a clear coat that is hard and durable. At the same time it adds a layer of protection and interest and is a good solution if you have wood in your home that is not the color your would like it to be. Dip a lint-free cloth in your Clear Wax and then use it to rub off any White Wax where you don’t want it. Clean the wood surface with a sponge dampened with a solution of one teaspoon dish soap and four cups of warm water to remove dust, dirt, and grime fromthe grain and surrounding wood surface. So I bought some brown wax often used over chalk paint to age or distress finishes and applied that in areas to get back to the medium brown I was hoping for.