Upgrading the extruder is a fairly straightforward upgrade that you can complete with the tools that are included with your 3D printer. In the future, this aluminum heatsink can be replaced with a water-cooling attachment for the hotend, for really toasty environments. By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising. Filament path is correctly constrained, and paired with the short distance from the gears to the nozzle makes the Sprite Extruder a good performer when printing TPU filament.

Sprite Extruder Pro AND CR-Touch [Tutorial] Just bought the Sprite Extruder Pro AND CR-Touch

This is mainly due to the much smaller retraction distances, since the large retraction movements required with Bowden extruders bring more heated filament into the cold side of the hot end. In this article, we will check out the Creality Sprite Pro Extruder Full Upgrade Kit which is the all-metal variant installed on the Ender 3 S1 Pro and CR-10 Smart Pro but with some extra accessories to make upgrading other printers easier. Below the gear, the filament path is fully enclosed, which is important to prevent jamming when printing with flexible filaments like TPU. On the Sprite extruder, you can use a finger to pull back on the spring-loaded lever, which will allow you to push filament all the way through the hot end to the nozzle.It’s a complete direct drive print head with good printing performance, capable of reaching up to 300C. Before getting into the details, here’s a recap of our upgrade recommendations: Which extruders should you upgrade? Yes, there are lighter and more compact extruders out there, but the Sprite Extruder comes with a more powerful Nema 17 extruder motor and the hotend is included in the extruder design.

Sprite Extruder Pro 300℃ High Temperature Printing | Full

If you are using a different printer, the steps may be slightly different, but the general process will be the same. This is a great upgrade, but I would suggest that Creality include the cable for the BLTOUCH or CRTOUCH. Due to this, the extruder is positioned somewhat further from the hot end than in the full Sprite extruder.The printers that use this extruder all have dual Z axis motors, which does help mitigate the extra weight. In contrast to Bowden-style extruders which push filament through a long tube to the hot end, the Sprite combines the extruder and hot end into a single assembly. The Sprite Pro is found on Creality’s direct drive-equipped machines with “Pro” in the name, such as the Ender 3 S1 Pro and CR-10 Smart Pro. With the tensioner you can adjust the pressure exerted on the filament by the drive gears according to your wishes and requirements, thus printing more precise models.

Sprite Extruder Pro kit for Ender 3 V2 Help with CR touch with Sprite Extruder Pro kit for Ender 3 V2

With the tensioner, you can adjust the pressure exerted on the filament by the drive gears according to your wishes and requirements, thus printing more precise models. The metal single-gear extruder is the workhorse extruder for Creality, and is now becoming more standard across their lineup. Of course, there’s no reason to purchase the regular extruder if you have a different printer, and you want to upgrade to the Sprite Extruder. You can get the whole hotend assembly which comes with a copper-plated heat block if you want to do the swap easier or have a spare.Keep in mind that upgrading to a dual-drive extruder will require you to calibrate E steps—more on this in the next section. which perfectly matches the motor, enables an extrusion force of up to 80N (depending on the filament) and more precise control of filament retraction. However, these hot ends can be a bit more susceptible to jamming than a standard hot end (although this is less of a concern with a direct drive extruder).

Creality Sprite Pro Extruder - 3DJake UK

This confirms that the hot end is still wired properly and that nothing was damaged during the installation process. Also one thing to note when chosseing the F401 chips the only options are 16bit (HID) or 32bit boot loaders. On the printer controller, navigate to Control -> Motion -> Steps/mm, and adjust the Esteps/mm value to 424. The dual-drive gear extruder will not damage the filament but makes the feeding more reliable and stable.Please note, it comes with standard Creality connections (JST-XH) so if you're board uses other ones you may have to change them. Don't forget to update your firmware and get a flexi bed on your V2 and you'll essentially have the S1.