The Complete Japanese Joinery

Product Information

The work surface can sit on saw horses and should be well braced throughout its length, so that it does not bow or bend when pressure is applied. While these and other Japanese firms design structures almost exclusively out of concrete and steel, wood was the dominant construction material in Japan for centuries. Adjusting the body of the plane entails checking the shape of the sole with a straight edge and adjusting the bottom surface of the body for easier planing. A slight flex in the wrists will help to maintain a constant angle through the length of the stroke.

THE COMPLETE JAPANESE JOINERY - Bibliothek THE COMPLETE JAPANESE JOINERY - Bibliothek

Once you start looking for the precision and skill with which these structures were built, you will be even more impressed.By utilizing the edge of another object and striking gently on the protruding portion of the board, the extra width is removed, as shown in Figure 2. The joints have more freedom to sway with the forces of the earthquake while still maintaining their integrity.

Japanese Wood Joinery Sashimono: The Subtle Art of Japanese Wood Joinery

Among the architectural principles found at Horyu-ji is a post-and-lintel construction based on the Chinese bay system, where columns hold up horizontal beams. Joinery can be used to combine pieces to make a beam longer, to attach pieces at perpendicular angles, or in fact to join pieces in just about any conceivable way. To view the purposes they believe they have legitimate interest for, or to object to this data processing use the vendor list link below.By and large, all warpage, expansion, contraction, swelling, and shrinkage in wood is a function of its moisture content, and this can vary considerably depending on the humidity in the air.

Art Of Japanese Joinery by Kiyosi Seike | Goodreads The Art Of Japanese Joinery by Kiyosi Seike | Goodreads

Saws for crosscutting softwood have teeth with the top at an angle of about 75° and the back angle at 90°, while the angle at the tip is about 30° (see Fig¬ ure 2. This project includes dimensioned drawings, cutlist and full-color photos of the most important steps. Using only the technique to join wood with complex joints and combining them is very much the essence of it. When the wire edge has been successfully removed, the white gleam will no longer be visible when the blade’s front face is reflecting light at eye level. Spine is split, but all pages remain intact, and although the book flops open, it sits without pages threatening to further remove.The outside-of-the-tree side of the wood should be used for the bottom face of a plane, so that any warpage will occur at the edges and be more easily corrected. Attributes like hardness, resistance to rot, moisture content, scent, color, and size are all considered. The world’s oldest wooden building, Horyu-ji in Nara, was constructed using this wood and has continued to stand for over 1300 years. The grain on the outside of the board is finer, its pattern is more pronounced, and it overlaps and will not rise, so that even when the floor is wiped it will not splinter. Most lumber today is kiln dried, a process which bakes the cells on the outer layer of a board, damaging their plasticity.