Gardner Bender DS-130 Duct Seal Compound, 1 lb. Pug, No Size, Grey

Product Information

Selection should be at the design stage, where the seal requirements can be matched to the overall project. Typically, a design specification will require water, gas and perhaps fire resistance together with specific chemical resistance. The life of the seal needed should also be considered. Every seal manufacturer should be able to provide proof of expected life. Over-engineering the seal design should also be avoided. A duct sealing solution that meets the specific needs of the application is the right solution. FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required. FiloSeal+HD is an engineered solution that provides a strong support system using the hexagonal tubes which builds up like a honeycomb structure. FiloSeal+HD is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required

Poor performing HVAC systems can lead to poor indoor air quality (IAQ) and a reduced level of comfort in buildings. People can spend as much of 90% of their time in indoor space, and increased comfort and IAQ have proven benefits to productivity and reduced absenteeism. It is vital, to make sure the duplex foam is wrapped around each cable, to create separation from each other and the inside of the duct. Running water CSD Duct Seals provided extensive trials in the York and Aylesbury area using their simple yet effective product, RISE Duct Seal using a split pvc duct frame to create more space in the existing overpopulated cable ducts within the cabinets.Re-enterable – CSD duct seals enable simple modification for adding, removing or replacing cables in retrofit projects Complies with DIN 18322 underground cable laying works - gas & watertight cable and conduit entries into buildings • Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2) Are you not convinced yet to use our MD5 Duct Sealing system instead of DIY Expanding PU foam from a can? If not, please read the test data below, performed by ourselves. You won't find a single manufacturer of expanding foams in a can with the same test data for sealing cables in a duct.

After injecting, the polyurethane sealant will expand and cures/hardens with a high density and a closed cell structureSeals all known materials: PVC & PE sheeted cables, PILC cables, (HD)PE pipes, PE drink water conduits Using a hammer & chisel or similar tool to break the seal around the cable and the inside of the duct